But wait…there’s more. We don’t just sell Rubber Stamps, we have a range of gifts and accessories available.

We have Timber Signs, Night Lights , Gift Tags, Name tags, Coasters, Bedroom Signs, key rings plus much more to come. We will be adding more of these products over the coming weeks.

KEY RINGS

View 3 16 48 Showing all 2 Results
View Cart Product successfully added to your cart.
  • PERSONALISED NAME TAG with/without image

    PERSONALISED NAME TAG with/without image

    $8.00
    These cute and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the keyring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine.

    Materials and Size

    The tags are supplied in timber or plastic. Each tag measure 10cm in length and 4cm in height.

    The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

    The plastic tags are made from a UV-resistant acrylic based laminate for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches. Thickness of the tag is 1.6mm. Being a laminate the tag is very strong and flexible.

    Customisation

    You have a choice of a wide range of images or characters to customise your tag.  If you require something else please choose "OTHER" in the image choice area ,make a note the special instructions are and contact us by email or phone so we can sort out the best option for you. 

    Personalisation

    Each tag can have a name engraved along with an image or character.  You can also purchase the name tag with just a name and no image. 

    Colour choice

    Your name tag can be supplied in a plywood, or acrylic. 

    The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

    Key Ring Attachment

    The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 




    These tags are NOT TOYS and should be handled accordingly
    PERSONALISED NAME TAG with/without image

    PERSONALISED NAME TAG with/without image

    $8.00
    These cute and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the keyring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine.

    Materials and Size

    The tags are supplied in timber or plastic. Each tag measure 10cm in length and 4cm in height.

    The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

    The plastic tags are made from a UV-resistant acrylic based laminate for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches. Thickness of the tag is 1.6mm. Being a laminate the tag is very strong and flexible.

    Customisation

    You have a choice of a wide range of images or characters to customise your tag.  If you require something else please choose "OTHER" in the image choice area ,make a note the special instructions are and contact us by email or phone so we can sort out the best option for you. 

    Personalisation

    Each tag can have a name engraved along with an image or character.  You can also purchase the name tag with just a name and no image. 

    Colour choice

    Your name tag can be supplied in a plywood, or acrylic. 

    The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

    Key Ring Attachment

    The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 




    These tags are NOT TOYS and should be handled accordingly

    PERSONALISED NAME TAG with/without image

    $8.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • PERSONALISED CLOUD NAME TAG

    PERSONALISED CLOUD NAME TAG

    $8.00
    Personalised Cloud Name Tags.
    So named because of the cloud like background around each name.
    These colourful and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the key ring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. Children can easily see which bag is theirs. We can incorporate the first letter of the surname as well. 

    Materials and Measurement

    The tags are supplied in timber or plastic. Measurements for the length vary but they will not exceed 10cm and are approximately  3 to 4cm in height again depending on ascending and descending letters.

    The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

    The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

    Customisation

    You have a choice of a wide range of colours to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

    Personalisation

    Each tag has the name engraved in capitals and lower case.

    Colour choice

    Your name tag can be supplied in a plywood, or acrylic. 

    The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

    Key Ring Attachment

    The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

    These tags are NOT TOYS and should be handled accordingly
    PERSONALISED CLOUD NAME TAG

    PERSONALISED CLOUD NAME TAG

    $8.00
    Personalised Cloud Name Tags.
    So named because of the cloud like background around each name.
    These colourful and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the key ring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. Children can easily see which bag is theirs. We can incorporate the first letter of the surname as well. 

    Materials and Measurement

    The tags are supplied in timber or plastic. Measurements for the length vary but they will not exceed 10cm and are approximately  3 to 4cm in height again depending on ascending and descending letters.

    The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

    The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

    Customisation

    You have a choice of a wide range of colours to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

    Personalisation

    Each tag has the name engraved in capitals and lower case.

    Colour choice

    Your name tag can be supplied in a plywood, or acrylic. 

    The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

    Key Ring Attachment

    The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

    These tags are NOT TOYS and should be handled accordingly

    PERSONALISED CLOUD NAME TAG

    $8.00
    Successfully Added to your Shopping Cart
    Adding to Cart...

DESK SIGNS

DESK SIGNS
View 3 16 48 Showing all 2 Results
View Cart Product successfully added to your cart.
  • PERSONALISED DESK SIGN SMALL

    PERSONALISED DESK SIGN SMALL

    $25.00
    Personalised Desk Sign

    Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
    These desk signs are easily assembled and come in several design styles.
    You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

    Dimensions

    The Small Desk sign base plate measures 21.5m in length and 7cm wide. The name plate measures 16cm in length x 6cm in height

    Materials

    Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

    Personalisation and Assembly

    Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

    Assembly on receipt of goods

    We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

    Gift Ideas

    These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.
    PERSONALISED DESK SIGN SMALL

    PERSONALISED DESK SIGN SMALL

    $25.00
    Personalised Desk Sign

    Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
    These desk signs are easily assembled and come in several design styles.
    You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

    Dimensions

    The Small Desk sign base plate measures 21.5m in length and 7cm wide. The name plate measures 16cm in length x 6cm in height

    Materials

    Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

    Personalisation and Assembly

    Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

    Assembly on receipt of goods

    We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

    Gift Ideas

    These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.

    PERSONALISED DESK SIGN SMALL

    $25.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • PERSONALISED DESK SIGN LARGE

    PERSONALISED DESK SIGN LARGE

    $35.00
    Personalised Desk Sign

    Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
    These desk signs are easily assembled and come in several design styles.
    You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

    Dimensions

    The Large Desk sign base plate measures 28cm wide  x 9cm in length. The name plate measures 26cm in length x 8cm in height

    Materials

    Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

    Personalisation and Assembly

    Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

    Assembly on receipt of goods

    We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

    Gift Ideas

    These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.

    HOW TO ORDER:
    1. Choose your design, colour and quantity.
    2. Add the item to your cart. You will see a note saying that your item has been added to cart. If you wish to checkout you can do so  from there or you can continue shopping and order the same item with different personalisation.
    3. If you require different customisation and personalisation to what we are offering, please contact us by email or phone so we can sort out the best ordering option for you.
    4. Please check your order details as refunds cannot be offered on personalised orders.

    These items are exclusively designed and remain the property of Price Graphics. They are sold under the divisional names of either PG Stamps or Teach n Stamp

    We send items by Australia Post or Go Logistics (if in Sydney area) You also have the option of Store Pick up.

    This sign is not a toy and should be handled accordingly
    PERSONALISED DESK SIGN LARGE

    PERSONALISED DESK SIGN LARGE

    $35.00
    Personalised Desk Sign

    Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
    These desk signs are easily assembled and come in several design styles.
    You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

    Dimensions

    The Large Desk sign base plate measures 28cm wide  x 9cm in length. The name plate measures 26cm in length x 8cm in height

    Materials

    Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

    Personalisation and Assembly

    Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

    Assembly on receipt of goods

    We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

    Gift Ideas

    These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.

    HOW TO ORDER:
    1. Choose your design, colour and quantity.
    2. Add the item to your cart. You will see a note saying that your item has been added to cart. If you wish to checkout you can do so  from there or you can continue shopping and order the same item with different personalisation.
    3. If you require different customisation and personalisation to what we are offering, please contact us by email or phone so we can sort out the best ordering option for you.
    4. Please check your order details as refunds cannot be offered on personalised orders.

    These items are exclusively designed and remain the property of Price Graphics. They are sold under the divisional names of either PG Stamps or Teach n Stamp

    We send items by Australia Post or Go Logistics (if in Sydney area) You also have the option of Store Pick up.

    This sign is not a toy and should be handled accordingly

    PERSONALISED DESK SIGN LARGE

    $35.00
    Successfully Added to your Shopping Cart
    Adding to Cart...

PLAQUES

View 3 16 48 Showing all 3 Results
View Cart Product successfully added to your cart.
  • PERSONALISED TIMBER CHARACTER ROOM PLAQUE

    PERSONALISED TIMBER CHARACTER ROOM PLAQUE

    $7.00
    Personalised Timber Character Plaque

    These super cute signs come in three sizes.   Mini, Medium and Large.

    Mini -  Approx 10cm in width - 

    Medium - Approx 15cm in width -

    Large - Approx 20cm in width - 

    Attach these cute signs to your door, wall, cupboards -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

    The plaques are made from plywood, engraved by laser. 

    You have the choice of purchasing the sign with laser burn only or being infilled with black paint. The rainbow option can also be supplied with a three colour glitter rainbow. If you do choose the Glitter Rainbow option , please list in the special instructions where you want each glitter colour placed.
    For example Dark Blue Glitter - bottom rainbow, Dark Purple - middle rainbow , Green Top rainbow. See options to choose your colours.

    These signs are NOT A TOY and should be handled with care.
    PERSONALISED TIMBER CHARACTER ROOM PLAQUE

    PERSONALISED TIMBER CHARACTER ROOM PLAQUE

    $7.00
    Personalised Timber Character Plaque

    These super cute signs come in three sizes.   Mini, Medium and Large.

    Mini -  Approx 10cm in width - 

    Medium - Approx 15cm in width -

    Large - Approx 20cm in width - 

    Attach these cute signs to your door, wall, cupboards -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

    The plaques are made from plywood, engraved by laser. 

    You have the choice of purchasing the sign with laser burn only or being infilled with black paint. The rainbow option can also be supplied with a three colour glitter rainbow. If you do choose the Glitter Rainbow option , please list in the special instructions where you want each glitter colour placed.
    For example Dark Blue Glitter - bottom rainbow, Dark Purple - middle rainbow , Green Top rainbow. See options to choose your colours.

    These signs are NOT A TOY and should be handled with care.

    PERSONALISED TIMBER CHARACTER ROOM PLAQUE

    $7.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • TIMBER OVAL PLAQUES FOR DAD

    TIMBER OVAL PLAQUES FOR DAD

    $12.00
    Timber Oval Dad themed Plaque

    These great signs come in three sizes.   Mini, Medium and Large.

    Mini -  Approx 11cm in width - 

    Medium - Approx 16cm in width -

    Large - Approx 21cm in width - 

    Attach these cute signs to your garage door, wall, cupboards, fridges, tool boxes, man caves, -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

    The plaques are made from plywood, engraved by laser. 

    You have the choice of purchasing the sign with laser burn only or being infilled with black paint. 

    The plaque that has been infilled with black paint is the fishing and dad's shed with the bike

    The plaque with the Troll reading a book is an example of laser burn only. 

    These signs are NOT A TOY and should be handled with care.
    TIMBER OVAL PLAQUES FOR DAD

    TIMBER OVAL PLAQUES FOR DAD

    $12.00
    Timber Oval Dad themed Plaque

    These great signs come in three sizes.   Mini, Medium and Large.

    Mini -  Approx 11cm in width - 

    Medium - Approx 16cm in width -

    Large - Approx 21cm in width - 

    Attach these cute signs to your garage door, wall, cupboards, fridges, tool boxes, man caves, -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

    The plaques are made from plywood, engraved by laser. 

    You have the choice of purchasing the sign with laser burn only or being infilled with black paint. 

    The plaque that has been infilled with black paint is the fishing and dad's shed with the bike

    The plaque with the Troll reading a book is an example of laser burn only. 

    These signs are NOT A TOY and should be handled with care.

    TIMBER OVAL PLAQUES FOR DAD

    $12.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • ACRYLIC TWO COLOUR NAME WALL PLAQUE

    ACRYLIC TWO COLOUR NAME WALL PLAQUE

    $35.00
    Acrylic two coloured name wall plaque. 

    These gorgeous signs will add that special touch to any room.

    Measurements
    These signs start at  20cm in length and are also available in 30, 40 and  50cm lengths (width) . All acrylic is 3mm thick.  The height of your name will depend on ascending and descending letters and will be proportionate to the length. The size chart will give you an indication of the height of your sign depending on the length you choose. 

    Colours
    Available with a black, white or coloured back layer then your choice of colour or black/white for the name.  We have tried to get the colour swatches as close to the actual colour as possible but there may be some differences.

    Materials
    Our signs are cut by laser and assembled in our store in Sydney. 

    Application
    They  can be hung on a wall or door using 3M removable tapes or any double sided tape of your choice. We do not supply any application tape. 

    These signs are not toys and should be handled accordingly.  The acrylic will chip or break if mishandled or dropped

    Maintenance

    We recommend using a dusting cloth and if you have stubborn marks use a small amount of water or window cleaner on a soft cloth to clean. 



    ACRYLIC TWO COLOUR NAME WALL PLAQUE

    ACRYLIC TWO COLOUR NAME WALL PLAQUE

    $35.00
    Acrylic two coloured name wall plaque. 

    These gorgeous signs will add that special touch to any room.

    Measurements
    These signs start at  20cm in length and are also available in 30, 40 and  50cm lengths (width) . All acrylic is 3mm thick.  The height of your name will depend on ascending and descending letters and will be proportionate to the length. The size chart will give you an indication of the height of your sign depending on the length you choose. 

    Colours
    Available with a black, white or coloured back layer then your choice of colour or black/white for the name.  We have tried to get the colour swatches as close to the actual colour as possible but there may be some differences.

    Materials
    Our signs are cut by laser and assembled in our store in Sydney. 

    Application
    They  can be hung on a wall or door using 3M removable tapes or any double sided tape of your choice. We do not supply any application tape. 

    These signs are not toys and should be handled accordingly.  The acrylic will chip or break if mishandled or dropped

    Maintenance

    We recommend using a dusting cloth and if you have stubborn marks use a small amount of water or window cleaner on a soft cloth to clean. 



    ACRYLIC TWO COLOUR NAME WALL PLAQUE

    $35.00
    Successfully Added to your Shopping Cart
    Adding to Cart...

LED ACRYLIC NIGHT LAMPS

View 3 16 48 Showing all 7 Results
View Cart Product successfully added to your cart.
  • PERSONALISED ACRYLIC RAINBOW NIGHT LAMP with BASE

    PERSONALISED ACRYLIC RAINBOW NIGHT LAMP with BASE

    $60.00
     This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font used for the name is as per the sample.

    This particular sign features a rainbow with a name underneath. 

    The acrylic measures 15 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    PERSONALISED ACRYLIC RAINBOW NIGHT LAMP with BASE

    PERSONALISED ACRYLIC RAINBOW NIGHT LAMP with BASE

    $60.00
     This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font used for the name is as per the sample.

    This particular sign features a rainbow with a name underneath. 

    The acrylic measures 15 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    PERSONALISED ACRYLIC RAINBOW NIGHT LAMP with BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • SWEET DREAMS RAINBOW ACRYLIC LED LIGHT with BASE

    SWEET DREAMS RAINBOW ACRYLIC LED LIGHT with BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a rainbow, the wording "Sweet Dreams" with room for a name underneath. 

    The acrylic measures 12 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    SWEET DREAMS RAINBOW ACRYLIC LED LIGHT with BASE

    SWEET DREAMS RAINBOW ACRYLIC LED LIGHT with BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a rainbow, the wording "Sweet Dreams" with room for a name underneath. 

    The acrylic measures 12 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    SWEET DREAMS RAINBOW ACRYLIC LED LIGHT with BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • SWEET DREAMS PANDA LED ACRYLIC LIGHT BASE

    SWEET DREAMS PANDA LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Panda and the wording "Sweet Dreams" with room for a name underneath.

    The acrylic measures 12 x 15cm and the base measurements are 15cm x 4.5 cm.

    The base and sign include a usb lead. Adaptor not supplied.

    Warm Light Base - Product Features 1. Is powered by a usb cable. 2. On/Off switch

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases.

    Product Specifications -

    Input - DC5.0V 1A Weight - 450g Light Source - LED Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care.
    SWEET DREAMS PANDA LED ACRYLIC LIGHT BASE

    SWEET DREAMS PANDA LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Panda and the wording "Sweet Dreams" with room for a name underneath.

    The acrylic measures 12 x 15cm and the base measurements are 15cm x 4.5 cm.

    The base and sign include a usb lead. Adaptor not supplied.

    Warm Light Base - Product Features 1. Is powered by a usb cable. 2. On/Off switch

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases.

    Product Specifications -

    Input - DC5.0V 1A Weight - 450g Light Source - LED Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care.

    SWEET DREAMS PANDA LED ACRYLIC LIGHT BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • SOCCER BALL LED ACRYLIC LIGHT BASE

    SOCCER BALL LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Soccer Ball  the wording Dreams Here with room for a name beside the ball. 

    The acrylic measures 8 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    SOCCER BALL LED ACRYLIC LIGHT BASE

    SOCCER BALL LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Soccer Ball  the wording Dreams Here with room for a name beside the ball. 

    The acrylic measures 8 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    SOCCER BALL LED ACRYLIC LIGHT BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • DREAM BIG MONSTER TRUCK LED ACRYLIC LIGHT BASE

    DREAM BIG MONSTER TRUCK LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Monster Truck,  the wording Dream Big with room for a name beside the truck. 

    The acrylic measures 7 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    DREAM BIG MONSTER TRUCK LED ACRYLIC LIGHT BASE

    DREAM BIG MONSTER TRUCK LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. The font for the name is as per the sample shown.

    This particular sign features a Monster Truck,  the wording Dream Big with room for a name beside the truck. 

    The acrylic measures 7 x 15cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    DREAM BIG MONSTER TRUCK LED ACRYLIC LIGHT BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • HAPPY BIRTHDAY STAR COMET LED ACRYLIC LIGHT BASE

    HAPPY BIRTHDAY STAR COMET LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. 


    This particular sign features a Star Comet with the wording Happy Birthday. 

    The acrylic measures 11 x 13.5cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    HAPPY BIRTHDAY STAR COMET LED ACRYLIC LIGHT BASE

    HAPPY BIRTHDAY STAR COMET LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. 


    This particular sign features a Star Comet with the wording Happy Birthday. 

    The acrylic measures 11 x 13.5cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    HAPPY BIRTHDAY STAR COMET LED ACRYLIC LIGHT BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • HAPPY BIRTHDAY STAR SPARKLE LED ACRYLIC LIGHT BASE

    HAPPY BIRTHDAY STAR SPARKLE LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. 


    This particular sign features a Star Sparkled backgroun with the wording Happy Birthday. 

    The acrylic measures 11 x 13.5cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 
    HAPPY BIRTHDAY STAR SPARKLE LED ACRYLIC LIGHT BASE

    HAPPY BIRTHDAY STAR SPARKLE LED ACRYLIC LIGHT BASE

    $60.00
    This gorgeous personalised  Night Light , comes with a warm light or coloured light base. 


    This particular sign features a Star Sparkled backgroun with the wording Happy Birthday. 

    The acrylic measures 11 x 13.5cm and the base measurements are 15cm x 4.5 cm. 

    The base and sign include a usb lead.  Adaptor not supplied.

    Warm Light Base -  Product Features  1. Is powered by a usb cable. 2. On/Off switch  

    Coloured Light Base - Product Features 1.Is powered by a usb cable. 2.The brightness can be adjusted using the dimmer function. 3. You can set the light on to one of 7 colours or the unit can be set to display all the colours on a continual rotation. 4. On/Off switch

    We don't supply the adaptor for either bases. 

    Product Specifications - 

    Input - DC5.0V 1A       Weight - 450g          Light Source - LED      Wattage - 1W

    Cleaning Instructions:

    Gently wipe with the acrylic sign with a soft cloth. Anything else will scratch the surface. Do not use sprays or liquids to clean the acrylic

    Please understand that this light base and sign is not a toy and should be handled with care. 

    HAPPY BIRTHDAY STAR SPARKLE LED ACRYLIC LIGHT BASE

    $60.00
    Successfully Added to your Shopping Cart
    Adding to Cart...

COASTERS

View 3 16 48 Showing all 2 Results
View Cart Product successfully added to your cart.
  • CORK COASTERS BEE THEME

    CORK COASTERS BEE THEME

    $5.00
    Our Cork Coasters are available in a range of themes or personalised with your name.

    These particular coasters feature a BEE theme.  You can purchase one or more coasters but there is an option to select the set of six (one of each design) to save you time if you wish to purchase all of them.

    Ordering
    If ordering more than one and less than 6 coasters, choose your total quantity then tick the numbered coasters you require. For eg. you would like 3 coasters...Nos 1, 5 and 6.  You can tick more than one number OR you can choose to purchase the whole six of them (last option)

    Material and Measurements

    The coasters have a thin cork top with a mdf base.  All together the coaster measures 3mm in thickness and 10cm in diametre. 

    Application

    Great for coffee or tea but equally as useful for beer, wine or spirits.  

    Engraving

    We laser engrave the coasters giving them a chocolate brown burn which looks great with the cork background. 

    These coasters are not toys and should be handled accordingly.
    CORK COASTERS BEE THEME

    CORK COASTERS BEE THEME

    $5.00
    Our Cork Coasters are available in a range of themes or personalised with your name.

    These particular coasters feature a BEE theme.  You can purchase one or more coasters but there is an option to select the set of six (one of each design) to save you time if you wish to purchase all of them.

    Ordering
    If ordering more than one and less than 6 coasters, choose your total quantity then tick the numbered coasters you require. For eg. you would like 3 coasters...Nos 1, 5 and 6.  You can tick more than one number OR you can choose to purchase the whole six of them (last option)

    Material and Measurements

    The coasters have a thin cork top with a mdf base.  All together the coaster measures 3mm in thickness and 10cm in diametre. 

    Application

    Great for coffee or tea but equally as useful for beer, wine or spirits.  

    Engraving

    We laser engrave the coasters giving them a chocolate brown burn which looks great with the cork background. 

    These coasters are not toys and should be handled accordingly.

    CORK COASTERS BEE THEME

    $5.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • CORK COASTERS COFFEE TEA THEME

    CORK COASTERS COFFEE TEA THEME

    $5.00
    Our Cork Coasters are available in a range of themes or personalised with your name.

    These particular coasters feature a COFFEE & TEA theme.  You can purchase one or more coasters but there is an option to select the set of six (one of each design) to save you time if you wish to purchase all of them.

    Ordering

    If ordering more than one and less than 6 coasters, choose your total quantity then tick the numbered coasters you require. For eg. you would like 3 coasters...Nos 1, 5 and 6.  You can tick more than one number OR you can choose to purchase the whole six of them (last option)

    Material and Measurements

    The coasters have a thin cork top with a mdf base.  All together the coaster measures 3mm in thickness and 10cm in diametre. 

    Application

    Great for coffee or tea but equally as useful for beer, wine or spirits.  

    Engraving

    We laser engrave the coasters giving them a chocolate brown burn which looks great with the cork background. 

    These coasters are not toys and should be handled accordingly.
    CORK COASTERS COFFEE TEA THEME

    CORK COASTERS COFFEE TEA THEME

    $5.00
    Our Cork Coasters are available in a range of themes or personalised with your name.

    These particular coasters feature a COFFEE & TEA theme.  You can purchase one or more coasters but there is an option to select the set of six (one of each design) to save you time if you wish to purchase all of them.

    Ordering

    If ordering more than one and less than 6 coasters, choose your total quantity then tick the numbered coasters you require. For eg. you would like 3 coasters...Nos 1, 5 and 6.  You can tick more than one number OR you can choose to purchase the whole six of them (last option)

    Material and Measurements

    The coasters have a thin cork top with a mdf base.  All together the coaster measures 3mm in thickness and 10cm in diametre. 

    Application

    Great for coffee or tea but equally as useful for beer, wine or spirits.  

    Engraving

    We laser engrave the coasters giving them a chocolate brown burn which looks great with the cork background. 

    These coasters are not toys and should be handled accordingly.

    CORK COASTERS COFFEE TEA THEME

    $5.00
    Successfully Added to your Shopping Cart
    Adding to Cart...