Personalised Cloud Name Tags.
So named because of the cloud like background around each name.
These colourful and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the key ring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. Children can easily see which bag is theirs. We can incorporate the first letter of the surname as well. 

Materials and Measurement

The tags are supplied in timber or plastic. Measurements for the length vary but they will not exceed 10cm and are approximately  3 to 4cm in height again depending on ascending and descending letters.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

Customisation

You have a choice of a wide range of colours to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag has the name engraved in capitals and lower case.

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These tags are NOT TOYS and should be handled accordingly

Metal Stamp Ink 28ml.  BLACK

This oil based ink is suitable for metal numbering machines .

Re-Inking

Use only oil-based ink in your numbering machine to prevent the rusting of the wheels and to ensure a smooth action. If a water-based ink is applied the machine is more likely to lock up due to lack of lubrication.  

Re-ink the metal numbering machine when the ink starts to fade. Simply add a few drops on ink on to the pad. Wait for the ink to absorb and if you need more then repeat the process. 

Failure to re-ink the automatic numbering stamps with the correct ink will cause the metal wheels to rust therefore reducing the life of the machine.

Fabric Ink 28ml. Great for marking your children's shirts and other clothing or bags. Can be used on textiles such as cotton, linen and polyester. Black ink only.